APC Smart-UPS RT 2000VA, 220V, Without Battery
| overview | |
| Delivery date | Usually available from stock |
| main information | |
| Main Input Voltage | 230 VAC 1 phase |
| Other Input Voltage | 220 volts |
| Main Output Voltage | 220/230/240 V AC 1 phase |
| Other Output Voltage | 230 V |
| Rated power [W] | 1800 W |
| Rated power [VA] | 2000 VA |
| Input Connection Type | IEC 60320 |
| output connection type | 6 IEC 60320 C13 |
| Number of rack units | 2U |
| Included equipment | Smart-UPS RS232 signal cable |
| Battery and run time | |
| Battery Type | Lead-acid batteries |
| Empty battery slot | 0 |
| Battery charging voltage (watts) | Rated |
| Universal | |
| topology | Double conversion online |
| Maximum bypass input current | 9.1 A |
| Number of power module free
slots |
0 |
| Number of power module filled slots |
0 |
| Redundant | No |
| Physical parameters | |
| color | Black |
| high | 85 mm |
| width | 438 mm |
| depth | 530 mm |
| net weight | 11.85 kg |
| Installation location | Front |
| Mounting preference | No preference |
| Installation type | Rack-mounted with kit |
| Two post mountable | 0 |
| USB compatible | No |
| enter | |
| Network frequency | 40.…70 Hz+/-3 Hz auto-sensing |
| Input voltage limit | 100.…275 V |
| Input total harmonic distortion | For full load,less than 10% |
| Load power factor | From lead 0.9 to lag 0.9 |
| Input Power Factor at Full Load | 0.99 |
| output | |
| Maximum configurable power in
VA |
2000 VA |
| Maximum configurable power
(watts) |
1800 W
50/60 Hz+1-3 Hz synchronized with main frequency |
| Output frequency (synchronized with main frequency) |
|
| Waveform type | Sine wave |
| Output voltage tolerance | +/-5 % |
| Output voltage THD | <1%linear load and<3%non-linear load |
| power | 89 % |
| conversion time | Typical value is 8 ms:Maximum value is 10 ms |
| harmonic distortion | Less than 2% |
| Crest coefficient | 3:1 |
| Bypass type | Internal bypass(automatic and manual) |
| Other parameters | Can be set to 220,230 or 240 output voltage |
| conformity | |
| certified product | CE |
| Standards compliant | EN/IEC 62040-1:2017 |
| environment | |
| operating temperature | 0.40 ℃ |
| Relative humidity | 0…95 %non-condensing |
| Working altitude | 0..6600 ft |
| Storage ambient temperature | -15..45 ℃ |
| Storage relative humidity | 0…95 %non-condensing |
| Storage height | 0.00…15240.00 m |
| sound level | 55 dB |
| IP protection level | IP20 |
| Communications and Manageme | nt |
| Pre-installed SmartSlotTM card | Network management card
Alarm when on battery:distinctive low battery alarm:overload continuous |
| alarm | tone alarm |
| emergency shutdown | Yes |
| packaging unit | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 230 mm |
| Package 1 Width | 565 mm |
| Package 1 Length | 700 mm |
| Package 1 Weight | 14.7 kg |
| Contract warranty | |
| Warranty | 2 years repair or replace |
$1,499.00 Original price was: $1,499.00.$815.00Current price is: $815.00.
Don't Miss Top Accessories
APC NetShelter Cable Management, Horizontal Cable Manager, 1U, Single Side with Cover, Black, 483 x 44 x 110 mm
APC SP Series UPS, 10KVA UPS with External Battery, Tower Rack Convertible UPS
Smart-UPS RT 192V Battery Pack APC Battery
APC Rack PDU 2G, Switched, 32A, 230V, (21) C13 & (3) C19 PDU
APC Easy UPS 3M Parallel Kit for 60-200 kVA
APC SP series UPS, 2KVA Tower SPM UPS with External Battery
APC Service Bypass Panel- 230V; 32A; MBB; Hardwire Input; (4) IEC-320 C19 Output PDU
APC NetShelter Metered Rack PDU, 2U, 1PH, 7.4kW 230V 32A, x12 C13 and x4 C19 outlets, IEC 309 cord PDU
APC Corporation APCRBC140 Replacement Battery Case UPS Replacement Batteries
Eaton 5P Gen2 UPS 650VA 520 W Input C14 Outputs (4) C13 Rack 1U
Schneider Electric SY100K250D Symmetra PX 100KW Scalable to 250KW Without Maintenance Bypass or Distribution-Parallel Capable
All orders will be shipped by NuPhy within 48 hours of order confirmation, tracking numbers are provided no later than a day after shipment on business days. You can check Shipping Policy for more information.
NuPhy offers a 1-year limited warranty for all NuPhy products. If there is any quality issue, please send relevant images or videos to service@nuphy.com for review.
NuPhy offers a 1-year limited warranty for all NuPhy products. If there is any quality issue, please send relevant images or videos to service@nuphy.com for review.
| overview | |
| Delivery date | Usually available from stock |
| main information | |
| Main Input Voltage | 230 VAC 1 phase |
| Other Input Voltage | 220 volts |
| Main Output Voltage | 220/230/240 V AC 1 phase |
| Other Output Voltage | 230 V |
| Rated power [W] | 1800 W |
| Rated power [VA] | 2000 VA |
| Input Connection Type | IEC 60320 |
| output connection type | 6 IEC 60320 C13 |
| Number of rack units | 2U |
| Included equipment | Smart-UPS RS232 signal cable |
| Battery and run time | |
| Battery Type | Lead-acid batteries |
| Empty battery slot | 0 |
| Battery charging voltage (watts) | Rated |
| Universal | |
| topology | Double conversion online |
| Maximum bypass input current | 9.1 A |
| Number of power module free
slots |
0 |
| Number of power module filled slots |
0 |
| Redundant | No |
| Physical parameters | |
| color | Black |
| high | 85 mm |
| width | 438 mm |
| depth | 530 mm |
| net weight | 11.85 kg |
| Installation location | Front |
| Mounting preference | No preference |
| Installation type | Rack-mounted with kit |
| Two post mountable | 0 |
| USB compatible | No |
| enter | |
| Network frequency | 40.…70 Hz+/-3 Hz auto-sensing |
| Input voltage limit | 100.…275 V |
| Input total harmonic distortion | For full load,less than 10% |
| Load power factor | From lead 0.9 to lag 0.9 |
| Input Power Factor at Full Load | 0.99 |
| output | |
| Maximum configurable power in
VA |
2000 VA |
| Maximum configurable power
(watts) |
1800 W
50/60 Hz+1-3 Hz synchronized with main frequency |
| Output frequency (synchronized with main frequency) |
|
| Waveform type | Sine wave |
| Output voltage tolerance | +/-5 % |
| Output voltage THD | <1%linear load and<3%non-linear load |
| power | 89 % |
| conversion time | Typical value is 8 ms:Maximum value is 10 ms |
| harmonic distortion | Less than 2% |
| Crest coefficient | 3:1 |
| Bypass type | Internal bypass(automatic and manual) |
| Other parameters | Can be set to 220,230 or 240 output voltage |
| conformity | |
| certified product | CE |
| Standards compliant | EN/IEC 62040-1:2017 |
| environment | |
| operating temperature | 0.40 ℃ |
| Relative humidity | 0…95 %non-condensing |
| Working altitude | 0..6600 ft |
| Storage ambient temperature | -15..45 ℃ |
| Storage relative humidity | 0…95 %non-condensing |
| Storage height | 0.00…15240.00 m |
| sound level | 55 dB |
| IP protection level | IP20 |
| Communications and Manageme | nt |
| Pre-installed SmartSlotTM card | Network management card
Alarm when on battery:distinctive low battery alarm:overload continuous |
| alarm | tone alarm |
| emergency shutdown | Yes |
| packaging unit | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 230 mm |
| Package 1 Width | 565 mm |
| Package 1 Length | 700 mm |
| Package 1 Weight | 14.7 kg |
| Contract warranty | |
| Warranty | 2 years repair or replace |

Reviews
Clear filtersThere are no reviews yet.