APC Smart-UPS RT 2000VA, 220V, Without Battery
| overview | |
| Delivery date | Usually available from stock |
| main information | |
| Main Input Voltage | 230 VAC 1 phase |
| Other Input Voltage | 220 volts |
| Main Output Voltage | 220/230/240 V AC 1 phase |
| Other Output Voltage | 230 V |
| Rated power [W] | 1800 W |
| Rated power [VA] | 2000 VA |
| Input Connection Type | IEC 60320 |
| output connection type | 6 IEC 60320 C13 |
| Number of rack units | 2U |
| Included equipment | Smart-UPS RS232 signal cable |
| Battery and run time | |
| Battery Type | Lead-acid batteries |
| Empty battery slot | 0 |
| Battery charging voltage (watts) | Rated |
| Universal | |
| topology | Double conversion online |
| Maximum bypass input current | 9.1 A |
| Number of power module free
slots |
0 |
| Number of power module filled slots |
0 |
| Redundant | No |
| Physical parameters | |
| color | Black |
| high | 85 mm |
| width | 438 mm |
| depth | 530 mm |
| net weight | 11.85 kg |
| Installation location | Front |
| Mounting preference | No preference |
| Installation type | Rack-mounted with kit |
| Two post mountable | 0 |
| USB compatible | No |
| enter | |
| Network frequency | 40.…70 Hz+/-3 Hz auto-sensing |
| Input voltage limit | 100.…275 V |
| Input total harmonic distortion | For full load,less than 10% |
| Load power factor | From lead 0.9 to lag 0.9 |
| Input Power Factor at Full Load | 0.99 |
| output | |
| Maximum configurable power in
VA |
2000 VA |
| Maximum configurable power
(watts) |
1800 W
50/60 Hz+1-3 Hz synchronized with main frequency |
| Output frequency (synchronized with main frequency) |
|
| Waveform type | Sine wave |
| Output voltage tolerance | +/-5 % |
| Output voltage THD | <1%linear load and<3%non-linear load |
| power | 89 % |
| conversion time | Typical value is 8 ms:Maximum value is 10 ms |
| harmonic distortion | Less than 2% |
| Crest coefficient | 3:1 |
| Bypass type | Internal bypass(automatic and manual) |
| Other parameters | Can be set to 220,230 or 240 output voltage |
| conformity | |
| certified product | CE |
| Standards compliant | EN/IEC 62040-1:2017 |
| environment | |
| operating temperature | 0.40 ℃ |
| Relative humidity | 0…95 %non-condensing |
| Working altitude | 0..6600 ft |
| Storage ambient temperature | -15..45 ℃ |
| Storage relative humidity | 0…95 %non-condensing |
| Storage height | 0.00…15240.00 m |
| sound level | 55 dB |
| IP protection level | IP20 |
| Communications and Manageme | nt |
| Pre-installed SmartSlotTM card | Network management card
Alarm when on battery:distinctive low battery alarm:overload continuous |
| alarm | tone alarm |
| emergency shutdown | Yes |
| packaging unit | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 230 mm |
| Package 1 Width | 565 mm |
| Package 1 Length | 700 mm |
| Package 1 Weight | 14.7 kg |
| Contract warranty | |
| Warranty | 2 years repair or replace |
$1,499.00 Original price was: $1,499.00.$815.00Current price is: $815.00.
Don't Miss Top Accessories
APC Rack PDU,Basic, Zero U, 16A, 230V, (20) C13 & (4) C19 , IEC C20 PDU
Battery Breaker Box, two 630A DC breakers, for Galaxy VS/VL/VXL, Easy UPS 3-Phase Modular, and Easy UPS 3M Advanced
APC NetShelter SX, Server Rack Enclosure, 12U, Black, 658H x 600W x 900D mm
APC Smart-UPS RT 1000VA, 220V, Without Battery
APC Smart-UPS C, Line Interactive, 1000VA, Rackmount 2U, 230V, 4x IEC C13 outlets, USB and Serial communication, AVR, Graphic LCD APC UPS
Rack Power Distribution Unit (PDU), Basic, 1U, 22kW, 400V, (6) C19
APC Smart-UPS C, Line Interactive, 3kVA, Rackmount 2U, 230V, 8x IEC C13+1x IEC C19 outlets, USB and Serial communication, AVR, Graphic LCD APC UPS
Rack Access, Kit, NetBotz, 125 kHz 2 Handle
APC Symmetra LX XR Communication Card
APC Rack PDU, Basic, Zero U, 32A, 230V, (20)C13 & (4)C19 PDU
All orders will be shipped by NuPhy within 48 hours of order confirmation, tracking numbers are provided no later than a day after shipment on business days. You can check Shipping Policy for more information.
NuPhy offers a 1-year limited warranty for all NuPhy products. If there is any quality issue, please send relevant images or videos to service@nuphy.com for review.
NuPhy offers a 1-year limited warranty for all NuPhy products. If there is any quality issue, please send relevant images or videos to service@nuphy.com for review.
| overview | |
| Delivery date | Usually available from stock |
| main information | |
| Main Input Voltage | 230 VAC 1 phase |
| Other Input Voltage | 220 volts |
| Main Output Voltage | 220/230/240 V AC 1 phase |
| Other Output Voltage | 230 V |
| Rated power [W] | 1800 W |
| Rated power [VA] | 2000 VA |
| Input Connection Type | IEC 60320 |
| output connection type | 6 IEC 60320 C13 |
| Number of rack units | 2U |
| Included equipment | Smart-UPS RS232 signal cable |
| Battery and run time | |
| Battery Type | Lead-acid batteries |
| Empty battery slot | 0 |
| Battery charging voltage (watts) | Rated |
| Universal | |
| topology | Double conversion online |
| Maximum bypass input current | 9.1 A |
| Number of power module free
slots |
0 |
| Number of power module filled slots |
0 |
| Redundant | No |
| Physical parameters | |
| color | Black |
| high | 85 mm |
| width | 438 mm |
| depth | 530 mm |
| net weight | 11.85 kg |
| Installation location | Front |
| Mounting preference | No preference |
| Installation type | Rack-mounted with kit |
| Two post mountable | 0 |
| USB compatible | No |
| enter | |
| Network frequency | 40.…70 Hz+/-3 Hz auto-sensing |
| Input voltage limit | 100.…275 V |
| Input total harmonic distortion | For full load,less than 10% |
| Load power factor | From lead 0.9 to lag 0.9 |
| Input Power Factor at Full Load | 0.99 |
| output | |
| Maximum configurable power in
VA |
2000 VA |
| Maximum configurable power
(watts) |
1800 W
50/60 Hz+1-3 Hz synchronized with main frequency |
| Output frequency (synchronized with main frequency) |
|
| Waveform type | Sine wave |
| Output voltage tolerance | +/-5 % |
| Output voltage THD | <1%linear load and<3%non-linear load |
| power | 89 % |
| conversion time | Typical value is 8 ms:Maximum value is 10 ms |
| harmonic distortion | Less than 2% |
| Crest coefficient | 3:1 |
| Bypass type | Internal bypass(automatic and manual) |
| Other parameters | Can be set to 220,230 or 240 output voltage |
| conformity | |
| certified product | CE |
| Standards compliant | EN/IEC 62040-1:2017 |
| environment | |
| operating temperature | 0.40 ℃ |
| Relative humidity | 0…95 %non-condensing |
| Working altitude | 0..6600 ft |
| Storage ambient temperature | -15..45 ℃ |
| Storage relative humidity | 0…95 %non-condensing |
| Storage height | 0.00…15240.00 m |
| sound level | 55 dB |
| IP protection level | IP20 |
| Communications and Manageme | nt |
| Pre-installed SmartSlotTM card | Network management card
Alarm when on battery:distinctive low battery alarm:overload continuous |
| alarm | tone alarm |
| emergency shutdown | Yes |
| packaging unit | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 230 mm |
| Package 1 Width | 565 mm |
| Package 1 Length | 700 mm |
| Package 1 Weight | 14.7 kg |
| Contract warranty | |
| Warranty | 2 years repair or replace |

Reviews
Clear filtersThere are no reviews yet.